Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Brake Pressure Bleeder - AGMProducts
Using the brake bleeder on a toyota
Universal bleeder attachment_AGM brake bleeder
Bleeding brakes on a Polaris Turbo S
AGM brake pressure bleeder-vehcile-brakes

Brake Pressure Bleeder

$98.79
SKU: AGM-BPB-1000
Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:$164.45
Description

"Works fantastic! Should've bought years ago. Makes doing brakes yourself that much easier".- Blake S.

 

 

When some jerk cuts you off in traffic, you need to know your brakes are going to work well for you and your family.

That's why regular maintenance like bleeding your brakes is so important. But the professional service can be costly and time-consuming. And a small part of you always wonders "did they do it right" and "Do I trust them with my families safety?"

If you're handy, detail-oriented, and can follow a YouTube video, then you do not have to find out if they did it wrong. You can use this tool to bleed your own brakes.


 

 

"I love the product, already serviced a second car at my home that had a bad rear wheel cylinder and bleed the brakes all around in minutes. So I did them twice just for good measure"... - Andres G.

 

 

 

The AGM Brake Pressure Bleeder's easy to use design takes the stress out of the job. You can now bleed your brakes by yourself in minutes, instead of wasting hours of your life in a fit of rage using the old manual method.

This positive pressure system gives you a professional quality brake bleed from the comfort of your garage. For less than the Dealership might charge for a single brake flush.

Check out this "How To" video to see just how easy it is to use the system.


 



NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY. 

 

**Key Benefits:**

👤 One Person Job: No need to wait around until a friend is free. This easy-to-use system lets you take control. Bleed brakes by yourself in minutes, not hours, with no messy clean up.

 

💨 Constant Pressure:  The AGM Brake Pressure Bleeder uses high power compressed air from your air compressor to force 100% of that dirty nasty fluid and air out of your brake system (no matter how complex it is). Giving you back that responsive brake pedal feel and making your car safe to drive again. 

 

👍 Works with ABS & Traction Control: Dealerships use expensive positive pressure bleeders to flush brake systems on vehicle equipped with ABS and traction control. With the AGM Bleeder, now you can too....at home...at a fraction of the price.

 

BONUS: And if all these benefits weren't enough, we'll also throw in a FREE Catch Bottle, Syringe, and Filler Cap Wrench.



Get your AGM Brake Pressure Bleeder today and bleed brakes like a pro!.....your family will thank you.  


 

Specs:

  • 3 liter capacity
  • Built in adjustable pressure regulator
  • Built in pressure gauge
  • Built in ball valve to seal system from atmosphere
  • Works with air compressor
  • Works on vehicles with ABS or traction control

NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY. 

Adapters are not a one size fits all, there are so many different vehicle designs that we could not possibly guess which one would fit your vehicle. Which means that you would end up paying for parts you don't need and would never use. For this reason the adapters are sold separate. So you only purchase what you need.

 

    HOW TO USE

    Step_1_fill_the_bleeder - AGMProducts

    STEP ONE

    Fill with the correct brake fluid for your vehicle.

    Step_2_Connect_air_to_AGM_Brake_Bleeder_combined - AGMProducts

    STEP TWO

    Connect to air compressor and your vehicle.

    Step_3_Open_ball_valve - AGMProducts

    STEP THREE

    Slowly open the ball valve to begin your brake bleed.

    WHY SHOULD I CARE ABOUT BLEEDING BRAKES?

    FLUIDS CRITICAL ROLE

    If you are asking this question, that is a great start. Many people have not been told of the critical role that brake fluid plays in keeping you safe while driving. Watch this video before you drive again.

    Customer Reviews

    Based on 64 reviews
    78%
    (50)
    5%
    (3)
    9%
    (6)
    3%
    (2)
    5%
    (3)
    S
    Scott Z.
    Buy once cry once

    That saying applies here for sure ,, I did new brake lines with my portals on a x3 and tried to vac bleed these
    I had already known about the AGM and cap setup from the forums ,, well bleeding was going poorly so bought this kit and 3 days later I had it , 30 min later my brakes were all bled ,, flawless and if you buy a 45* 1/4 npt you can use the AGM fitting with a windshield in place

    User picture
    E
    Erin T.
    Outstanding Product - AGM Products Brake Pressure Bleeder

    I felt strongly enough to write a review of the AGM products Brake Pressure Bleeder and Brake Reservoir Cap - Universal Adapter. I am very familiar with the traditional method of bleeding brakes through pumping of the brake pedal and opening the bleeder screw. This was always a 2-person job but no more. I used this kit of items on my 2009 C6 Corvette and it worked flawlessly. I did not fill the canister with brake fluid, rather I wanted to fill the brake fluid manually after performing two brakes lines at a time. The universal cap adapter securely fit on the brake fluid holding tank securely allowing the positive air pressure from escaping. Follow the directions and use no more than 12-15 psi in the tank and ensure no leaking through the rubber cap on the tank. Additionally, when using the cap adapter, ensure you route the chain around any brake lines or wires, this is an extremely important step. I hope this gives any car enthusiast the confidence to perform the brake bleeding method by themself in a safe and easy way. This is a wonderful product. And yes, I am an actual customer of this product and very happy with the decision to purchase!

    User picture
    G
    Gene
    Works but bad impression.

    It works, but it comes with a lot of black plastic debris in the chamber that you have to waste time, energy, and brake fluid to clean out. Otherwise you're pumping specs of black plastic into your ABS system and brake lines...

    Gene, I apologize, that is a shitty first impressions and not at all what we aim for. We will review the cleaning process before packaging to figure out how this slipped by QC. If you are still seeing small pieces of plastic in your bottle, we are happy to exchange the product for a new one free of charge. Please email us at sales@agm-products.com if we need to exchange the product.
    Thank you for making us aware of this and again we apologize for the oversight.

    M
    Mark S.
    Should include pressure specifications upfront with the product listing on the main page NO CLICKS!!

    preface to the wall of text... user error and lack of information up front
    So yea got a new to me car that needed a brake system overhaul (honda element for what its worth). I learned about the product and the Brake Pressure Bleeder kit from youtube.. And i literally laughed out loud and giggled like a school girl showing co-workers the products. ordered the whole shebang my following payday! skip to parts delivery day car is in the air calipers off lines "plugged" to avoid spillage... and then i realize the pressure rating of the universal adapter is lower than anticipated. had no way to go and purchase a secondary regulator to reliably down pressure consistently... hydraulic pressure yadda yadda and i spilled over a liter of fluid that belched from above and below the rubber boot!

    all that being said i assume its a good product if used directly as intended... cool products just need more concise information.

    my only gripe with the products is that most of the connecting hardware seems to be plated steel, for the price id expect the products to have stainless or brass materials used.

    P.S. would have been real nice to have a sticker or two for the tool boxes... or the bumper.. just sayin :)

    B
    Bobby H.
    Pressure bleeder

    The pressure bleeder. Is a huge benefit to a mechanic working alone. Bleed brakes with out help. Works great. Would recommend it for a small shop or even a big shop that does a lot of brake work

    123