Replacement Slider Inserts
Keep the Springs in Line
The precision-fit design helps keep the upper and lower springs aligned with the shock body, reducing the rubbing and contact that can damage expensive components.
Quiet the Ride
Smoother movement between the springs helps reduce the squeaks and creaks commonly heard from dual-rate coil-over suspension
Replace the Wear Part
When the insert eventually wears, replace the insert - not the complete slider or the suspension components it was designed to protect.
Frequently asked questions
No. The proprietary insert material is designed to operate without added lubrication.
Applying grease or another lubricant can attract dirt and debris to the shock body. That buildup may act as an abrasive and increase wear on moving suspension components.
AGM Suspension Sliders are currently available for Fox and King shocks. There are some fitment cross-over with other brands as well.
Contact AGM at sales@agm-products.com with shock fitment questions. Please have your shock body diameter measurements ready when you call.
AGM currently offers Suspension Sliders for 2.0, 2.5, and 3.0 in. shock bodies.
The listed size refers to the outside diameter of the threaded shock body.
Measure that outside diameter and match it to the appropriate slider size. Contact AGM before ordering if you are unsure which option fits your suspension.
Yes. The insert is intentionally designed as the replaceable wear surface that helps protect the more expensive shock body.
Inspect the insert during every vehicle preparation or routine suspension inspection. Replacement inserts are available for every Suspension Slider AGM sells.
Yes. Some applications do not provide enough clearance to run the longer side of the slider facing upward.
AGM includes crossover-ring contact surfaces on both sides of the housing, allowing the slider to be inverted when the suspension layout requires it.
Yes. If the outer housing is damaged by debris, impact, or a crash, contact AGM at info@agm-products.com for replacement components.
Yes.
- The 2.5 in. Fox Suspension Slider does not fit Fox Live Valve shocks.
- The 3.0 in. King Suspension Slider does not fit King IBP shocks.
Contact AGM before ordering if your shock configuration is not clearly listed.
Replacement slider inserts deliver excellent performance on trails with customers noting "5 stars on performance as that is most critical." However, shoppers report concerns about pricing increases (from $26 to $40 each) and durability, with inserts becoming noisy after approximately 15,000 miles of off-road use.
This is the second set of coilovers I have used the AGM sliders on and really like how they quiet them down and allow the springs to twist freely.
Thank you for your positive feedback on our Suspension Sliders. We are glad to hear that they have improved the performance of your coilovers and reduced noise. We appreciate your continued support. Enjoy the silence!
We depend on the Best parts for our Race Cars and Prerunners AGM sliders are even a cut above the Fox or King units. They are also usually always available even when the specific OE units are on backlog.
Great Parts AGM
easy install, great quailityand fast delivery
Great product makes changing uniballs so much easier
All we can say is "Bad Ass" Best Spring Dividers in the BIZ..They hold up the best on the 6100 SPEC truck shocks..Take a beating and keep on hammering...
Just got them in. Haven’t had a chance to ride yet. They helped straighten my springs which is what I was looking for.
FYI if your running crossovers the AGM slider upper rim sits a 1/4 inch higher then stock slider, so adjust your crossovers up.
All in all happy so far.
Mark, you make a great point about cross-over ring adjustments when replacing stock spring dividers with our AGM Suspension Sliders on your coil-over shocks. Thank you for sharing that advice and enjoy the upgrade!
Awesome product definitely stronger than the plastic ones that come with the shock no more worrying about breaking them any longer love the look!
I have a 2017 RZR XP 1000 and recently put some dual rate springs on it to help with the ride. The new springs were rubbing the crossover and shock body extremely bad and these dividers completely fixed that issue.
Matthew, we love hearing success stories. Thank you for taking the time to share.
I just replaced the slider inserts. This is the third set. The first was the set that came with the suspension sliders. The second set were 26 each and this set was 40 each. That is getting on the pricey side. My rig is a build 08 JKU and is not a daily driver. I is driven on the trail and to the trails. I seem to be getting about 15,000 miles on a set and then things get noisy.
So 5 stars on performance as that is most critical but I'd go 2 or 3 stars for value.
These last a lot longer and are a lot quieter than the stock sliders that come on coilovers. Extremely well made with always great customer service from AGM.
We have been running these on our personal cars and customers cars and the bottom line is THEY ARE WORTH IT! We have less spring issues, less shock damage and better performance. If you don't believe me, look at our photos on the podium! Seriously, well made product for racers by racers. They show up on time, look great and have good customer service.
Dont wanna be hearing noises on race day, so I love the AGM Sliders, Quiet. Product on the car dont even have to think about. Hand tools in the shop are night and day easier.
