Universal bleeder attachment_AGM brake bleeder

Brake Pressure Bleeder

Name: Brake Pressure Bleeder
Brand: AGM-Products
SKU: AGM-BPB-1000
Price: 98.79 USD
Availability: InStock
Rating: 4.66 (47 reviews)

$98.79

SKU: AGM-BPB-1000

Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:$165.77

This item: Brake Pressure Bleeder $98.79
Brake Reservoir Cap - Universal Adapter $49.99
ATE Dot 4 SL $16.99

Description

Description

"Works fantastic! Should've bought years ago. Makes doing brakes yourself that much easier".- Blake S.

When some jerk cuts you off in traffic, you need to know your brakes are going to work well for you and your family.

That's why regular maintenance like bleeding your brakes is so important. But the professional service can be costly and time-consuming. And a small part of you always wonders "did they do it right" and "Do I trust them with my families safety?"

If you're handy, detail-oriented, and can follow a YouTube video, then you do not have to find out if they did it wrong. You can use this tool to bleed your own brakes.

"I love the product, already serviced a second car at my home that had a bad rear wheel cylinder and bleed the brakes all around in minutes. So I did them twice just for good measure"... - Andres G.

The AGM Brake Pressure Bleeder's easy to use design takes the stress out of the job. You can now bleed your brakes by yourself in minutes, instead of wasting hours of your life in a fit of rage using the old manual method.

This positive pressure system gives you a professional quality brake bleed from the comfort of your garage. For less than the Dealership might charge for a single brake flush.

Check out this "How To" video to see just how easy it is to use the system.

NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY.

Key Benefits:

👤 One Person Job: No need to wait around until a friend is free. This easy-to-use system lets you take control. Bleed brakes by yourself in minutes, not hours, with no messy clean up.

💨 Constant Pressure: The AGM Brake Pressure Bleeder uses high power compressed air from your air compressor to force 100% of that dirty nasty fluid and air out of your brake system (no matter how complex it is). Giving you back that responsive brake pedal feel and making your car safe to drive again.

👍 Works with ABS & Traction Control: Dealerships use expensive positive pressure bleeders to flush brake systems on vehicle equipped with ABS and traction control. With the AGM Bleeder, now you can too....at home...at a fraction of the price.

BONUS: And if all these benefits weren't enough, we'll also throw in a FREE Catch Bottle, Syringe, and Filler Cap Wrench.

Get your AGM Brake Pressure Bleeder today and bleed brakes like a pro!.....your family will thank you.

Specs:

3 liter capacity
Built in adjustable pressure regulator
Built in pressure gauge
Built in ball valve to seal system from atmosphere
Works with air compressor
Works on vehicles with ABS or traction control

NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY.

Adapters are not a one size fits all, there are so many different vehicle designs that we could not possibly guess which one would fit your vehicle. Which means that you would end up paying for parts you don't need and would never use. For this reason the adapters are sold separate. So you only purchase what you need.

HOW TO USE

STEP ONE

Fill with the correct brake fluid for your vehicle.

Step_2_Connect_air_to_AGM_Brake_Bleeder_combined - AGMProducts

STEP TWO

Connect to air compressor and your vehicle.

STEP THREE

Slowly open the ball valve to begin your brake bleed.

WHY SHOULD I CARE ABOUT BLEEDING BRAKES?

FLUIDS CRITICAL ROLE

If you are asking this question, that is a great start. Many people have not been told of the critical role that brake fluid plays in keeping you safe while driving. Watch this video before you drive again.

Outstanding Product - AGM Products Brake Pressure Bleeder

I felt strongly enough to write a review of the AGM products Brake Pressure Bleeder and Brake Reservoir Cap - Universal Adapter. I am very familiar with the traditional method of bleeding brakes through pumping of the brake pedal and opening the bleeder screw. This was always a 2-person job but no more. I used this kit of items on my 2009 C6 Corvette and it worked flawlessly. I did not fill the canister with brake fluid, rather I wanted to fill the brake fluid manually after performing two brakes lines at a time. The universal cap adapter securely fit on the brake fluid holding tank securely allowing the positive air pressure from escaping. Follow the directions and use no more than 12-15 psi in the tank and ensure no leaking through the rubber cap on the tank. Additionally, when using the cap adapter, ensure you route the chain around any brake lines or wires, this is an extremely important step. I hope this gives any car enthusiast the confidence to perform the brake bleeding method by themself in a safe and easy way. This is a wonderful product. And yes, I am an actual customer of this product and very happy with the decision to purchase!

AGM BRAKE BLEEDERS

AGM are always awesome to deal with and always supply the highest quality products
Love AGM

Easiest bleed job ever

Just bled brakes on Ca Am maverick. Had to be the easiest bleed job I ever did. Going to bleed Tacoma and Tundra next. Now Im not stressed about bleeding my brakes. Its now a simple job. Thanks, AGM.

Great product. Works as advertised.

Seems to be pretty cool waiting for the rest of the kit to come in stock so I can try it

1 2 3

AGM electric jack

Love my AGM jack!!!! Works amazing!!!

From San José Del Cabo, Baja California Sur, MEXICO.

A couple of days ago, I submitted my application to become part of the AGM family and be able to distribute all of their products in Baja California Sur. My first purchase was a gas tank for a client who owns a 2025 Polaris RZR Pro R and this was the result!!

Good product

Doesn’t fit some floor jacks

Before purchasing I called AGM and told them that my floor jacks have a bracket covering the axle of the front wheels. I was told the Jack Rod should fit past the bracket. It does not fit so I had to make a modification to my Jack. Other than the Jack Rod is a brilliant easy to use safety implement

Durable, Well Designed! Must Have Tool for Euro and Side Skirts covering most of the Pinch Welds.

I just received my second Jack Rod Dual Lever for my mobile repair business!

The first one arrived quickly, and I was able to use it right away on a VW with tight jack points and no room for a jack stand. The Jack Rod solved that problem perfectly! Unfortunately, shortly after that job, my Q50 was stolen—with the Jack Rod inside. Oakland police found the car three days later, but the Jack Rod was gone. :,(

I had to bite the bullet and buy another one, it is 100% worth the investing in that tool. The Jack Rod makes my job easier, faster, and safer, especially for Euro cars and models like the G35/350Z, which have side skirts covering most of the pinch weld areas.

This isn’t a tool you have to treat delicately. I’ve tossed mine on the floor multiple times, and thanks to its durable metal coatings, it’s hard to scratch or dent. Eventually, I plan to get another 3.5T Jack Rod so I can jack up both sides of the front or rear of a car and have Jack Rods under both sides.

Thank you, AGM, for designing such an awesome tool that I use daily!