Written by: Sam Jacobs
(These tips work for UTVs as well)
ATV rollovers are unfortunately part of the learning cu...
Continue Reading
Just used it the first time to replace all the fluid and damn this made the job easier! Replaced all the fluid and no air in the system, even got rid of the spongy GM brake peddle!
I used an inline pressure regulator for added safety and usability.
My only complaint is the 60mL syringe came cracked down the side but I had a smaller on on hand to draw out he excess fluid from the reservoir.
Todd, thanks so much for sharing your experience! Sounds like the setup worked great - glad to hear it made the job easier and got that GM pedal feeling right again. Smart move adding the inline regulator too! Sorry to hear about the cracked syringe, though. We'll get a replacement sent out to you. Really appreciate you taking the time to share your story.
I recently purchased the manual jack for 400 bucks at the sand show and must say I’m so happy with this purchase. I used it to break my beads on my tires to install some 35’s on my can am x3 and used it to lift up my can am for the install.. the whole process was quick n easy and I should’ve purchased one a long time ago. I couldn’t be happier with my Agm jack and it looks cool mounted to my can am in the rear as seen in the pic.SHOUT OUT TO AGM!! Fantastic product!!👍👍
Manny, thank you for sharing and for stopping by at the Sand Show! Sounds like the jack got put straight to work...and using it to break beads too? Love the creativity! These kinds of stories are why we build this stuff in the first place. Appreciate you taking the time to share it, and glad you’re loving the setup!
Jack mount bent when mounting it in place. If you don’t crank it down its loose and if you do crank it down base starts bending. Also the strap is already showing signs of fraying. The jack is amazing but I think these guys need to go back to the drawing board with this mount.
Shane, thank you for sharing your experience. This is super important for us to see as we did not experience what you are talking about during development. We will look at different materials as well as methods for improving grip to reduce torque required on the bolts. We'd like to work with you to solve this, please check your email for more details.
Used the mount to mount the scissor jack to my trailers tongue. Will be purchasing a second mount to quickly move the jack to my UTV. I, like others, am also worried the blue strap is thin and not as heavy duty and may wear through in time but that is easily enough remedied.
