Not sure which size you need? Click Here →

Quick Clamp - Panel Mount

Name: Quick Clamp - Panel Mount
Brand: AGMProducts
Price: 99.99 USD
Rating: 4.8 (5 reviews)

$99.99

SKU: AGM-EJA-2049-2

Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:$778.97

This item: Quick Clamp - Panel Mount $99.99
The Manual Jack Sport $429.99
Savage UTV Revolve Case For Electric Impact Wrench $129.00
Rapid Rope $119.99

Choose Your Mounting Style

Close-up of AGM Quick Clamps holding an AGM Manual Jack Sport attached the the chassis tube of an Can am off road vehicle.

Tube Mount

Use Tube Mount Quick Clamps when mounting to a chassis tube, roll cage tube, or other round tube.

Panel Mount

Use Panel Mount Quick Clamps when mounting to a roof rack, flat panel, tool box, trailer, or other flat surface.

A hand using a digital caliper to measure the width of an offroad vehicle roll bar inside a race car cockpit.

Measure Before Ordering

Measure
Before
Ordering

Measure the outside diameter of your mounting tube, then choose the Quick Clamp size that matches.

A man in a black work shirt and cap is shown from the side, using a red-handled tool to adjust or tighten an AGM Quick clamp on a roll cage inside a garage or workshop.

Mount Without Welding

Mount
Without
Welding

Position the clamp, secure it to your mounting location, and lock your jack or gear in place.

Vehicle Make

Vehicle Model

Year

Number of Seats

Mounting Location

Recommended Jack Mount

Frequently asked questions

What do AGM Quick Clamps do?

AGM Quick Clamps let you mount an AGM jack or other compatible round gear so it stays secure, organized, and easy to access.

Which AGM jacks work with Quick Clamps?

Quick Clamps are commonly used with the AGM Electric Jack PRO, Manual Jack PRO, and Manual Jack Sport.

How many Quick Clamps do I need to mount an AGM jack?

You need two Quick Clamps to mount an AGM jack.

What size Quick Clamp do I need?

Choose the Quick Clamp size that matches the outside diameter of the jack or gear you are securing. Also confirm the mounting location before ordering.

What is the difference between Tube Mount and Panel Mount Quick Clamps?

Tube Mount Quick Clamps are used to mount to chassis tubes, roll cage tubes, or other round tubes.
Panel Mount Quick Clamps are used to mount to roof racks, flat panels, tool boxes, trailers, or other flat surfaces.

Do Quick Clamps require welding?

No. Quick Clamps are designed for no-weld installation.

Can I use Quick Clamps for gear other than AGM jacks?

Yes. Quick Clamps can be used to secure compatible round gear from 1 in. to 2.5 in. diameter.

Are Quick Clamps permanent?

No. Quick Clamps are removable and do not require welding or permanent modification.

Can AGM help me choose the right Quick Clamps?

Yes. Use the Quick Clamp Finder or contact AGM with your vehicle, mounting location, and gear diameter so we can help point you toward the best option.

Panel mounting clamps that customers said "work great with their jacks" and are "very nice hardware." Highly rated for quality and compatibility. Some customers needed to fabricate for specific install locations and wished straps were slightly longer. Overall praised for effectiveness and build quality.

Hardware (positive)Jacks (positive)Brackets (positive)Clamps (positive)Straps (neutral)

5 stars: 4 (80%)
4 stars: 1 (20%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Polaris xpedition mount in back hatch

Overall good product. Had to fab a bit for my install location. I do wish the straps we slightly longer.

Clamps and jack work great!

Everything works great.

Thank you so much for your positive feedback on our Quick Clamp - Panel Mount. Love hearing that the clamps and jack are working great and that everything is working smoothly.

Work great with their jacks!

Mounting brackets

The brackets worked great. I am a little remorse that black Friday discounts started a couple of days after I purchased my item.

Very nice hardware

87%

(721)

(64)

(15)

(13)

(16)

481

Reinforced with a pin and drilled through for

Reinforced with a pin and drilled through for strap hook to keep very secure and not rattle around under hood on full cage baja bug. Held up great during thrashing climbing to top on Black peak in Pamo canyon. Did not move at all. Support was great and willcall in escondido another benefit to socal peeps!

Great jack

Bought this jack for Polaris General. Since we ride mostly alone I wanted a jack that is safe,fairly light and one that could right a rolled vehicle with proper technique. This jack fit the bill. The price was a hard swallow but piece of of mind was important to me. Now after owning it, I think it's great. It makes lifting the unit simple and fast in the field or in the shop. About me: 64 years old, polaris general xp4, travel and ride WV., Moab, AZ, SD.

Life saving solution!!!

Perfect solution for cars that don’t have room for both a floor jack and a jack stand such as my 2014 RS7

Works very well

Works great. Be careful not to tighten down to much. I got this one instead of the universal version due to the shape of the master cylinder under the reservoir.

Hi Matt, thank you for your positive review! We're glad the adapter works well for you. Thank you for sharing your tightening tip with others and thank you for taking the time to share your experience!

Incorrect sizes shown in picture

Update: AGM reached out to me and informed me they switched the 2-ton Jack Rod to the 6� long version, they must�ve had a couple of the older 10� versions laying around and I was sent that by accident. They next-day shipped me a replacement 6� 2-ton Jack Rod and allowed me to keep the longer version for free! Extremely happy with the fast resolution.Original Review: The product seems well made, however, the size chart is misleading/wrong. I originally bought the 3.5 ton Jack Rod, not realizing it was the middle size in the picture. I returned it and bought the 2 ton Jack Rod, which is supposed to be 6� according to the chart. This is the exact same size as the 3.5 ton version, despite it being smaller in the picture. If you don�t have an SUV or truck, you will have to jack your car up pretty high to be able to use this fot single wheel lifts.

Andy, our apologies for the mix up. Thank you for sharing your full experience and for giving us the opportunity to correct the oversight. Letting you keep the longer version was the least we could do for putting you out. We appreciate your patience and feedback. Thanks again for choosing AGM Products!

1 2 3

SHOP BY CATEGORY