Jack Rod - AGMProducts
All Jack Rod variations - AGM Products
Jack Rod Mini in the collapsed position - AGM Products
AGM 2 ton Jack Rod
AGM 3.5 ton Jack Rod
3.5 ton dual lever Jack Rod - AGM Products
Jack Rod - AGMProducts
Jack Rod - AGMProducts
3.5 ton dual leverl Jack Rod installed on a floor jack - AGM Products
Jack Rod - AGMProducts
Jack Rod Mini installed on a floor jack - AGM Products
Jack Rod supporting a car on a jack
Lifting with the Jack Rod
Height Guide for Jack Rod Selection
Jack Rod Fitment Guide
Jack Rod video-floor Jack-jack stand-racing-repair work-mobile service

Jack Rod

Availability : In Stock Pre order Out of stock

Size: 2 Ton

2 Ton
3.5 Ton
3.5 Ton XL
3.5 Ton Dual Lever

Turn your floor jack into a jack stand with the Jack Rod. 


Tired of the hassle and potential hazards of traditional jack stands? Say hello to the AGM Jack Rod, your ultimate solution for transforming your floor jack into a secure, reliable jack stand. No more worries about jack failures or struggling to position those clunky stands.


**Key Features:**

🔒 Safety First: The AGM Jack Rod is designed to keep you safe and worry-free. It extends into place effortlessly with a simple lever push and securely locks at your desired height. Even if your floor jack seal fails, the Jack Rod will continue to hold your car in place, giving you peace of mind during every project.


⏱️ Effortless Operation: Enjoy a hassle-free experience with the Jack Rod. No more wrestling with traditional jack stands or searching for the perfect spot to position them. This innovative tool streamlines your vehicle maintenance, saving you time and effort.


🛠️ Compact and Portable: The Jack Rod is compact and lightweight, making it a breeze to store in your toolbox, glove box, or even right on your floor jack with the Jack Rod Mount. Whether you're in your workshop, at the track, at a test sessions, or on the road for repairs, this versatile accessory is always at your service.


🏋️ Impressive Load Capacity: Don't be fooled by its sleek design; the Jack Rod is a powerhouse. It's compatible with most floor jacks and boasts an impressive load capacity, supporting vehicles ranging from 2 to 3.5 tons (depending on the variant).


🏆 Patented Innovation: The Jack Rod is backed by Patent No. 11,505,440, assuring you of its unique and cutting-edge design.


Upgrade your safety and convenience today. Say goodbye to bulky jack stands and experience the freedom to focus on the job in front of you, knowing your vehicle is securely propped up.


Make every vehicle project safer and more enjoyable with the AGM Jack Rod. Don't wait; get yours now and experience a new level of confidence and ease the next time you use a floor jack!

part# AGM-FJA-1008 (XL: for 4 wheel jacks)
Height: 14 - 24 inches
Weight: 4.2lbs
Capacity: 3.5 tons

Top Mount width: 2.5 inches

part# AGM-FJA-1009 (2 Ton: for 3 or 4 wheel Jacks)

Height: 8 - 14 inches

Weight: 3.2lbs

Capacity: 2 tons

Top Mount width: 1.95 inches


part# AGM-FJA-1010 (3.5 Ton: for 4 wheel jacks)
Height: 8 - 14 inches
Weight: 3.5lbs
Capacity: 3.5 tons

Top Mount width: 1.95 inches


part# AGM-FJA-1013 (3.5 Ton Dual Lever: for 4 wheel jacks)
Height: 8.75 - 14.625 inches
Weight: 3.7lbs
Capacity: 3.5 tons

Top Mount width: 2.5 inches

Great for high use applications like Tire or Body shops, where speed of installation and simplicity are paramount. 


NOTE: Floor Jacks not included.


2 Ton Jack Rod

Great choice for 1.5 and 2 ton capacity 3 or 4 wheel floor jacks. (works with floor jacks that have a single front roller wheel)

For lifting heights below 17 total inches (from ground to top of floor jack pad)


3.5 Ton Jack Rod

Does your floor jack have a capacity over 2 tons? Then the 3.5 ton Jack Rod is for you. Made for 4 wheel floor jacks with capacities from 1.5 - 3.5 ton.

For lifting heights below 17 total inches (from ground to top of floor jack pad)

Part#AGM-FJA-1010 or AGM-FJA-1012

Jack Rod - AGMProducts

3.5 Ton Jack Rod XL

If you have a high clearance vehicle or a vehicle with lots of wheel travel, than the XL is the what you need. Made for 4 wheel floor jacks with weight capacities from 1.5 - 3.5 tons.

For lifting heights above 17 total inches (from ground to top of floor jack pad)



Can I trust the front axle on my floor jack, what about the fact that my floor jack is on wheels?

Glad you asked. The short answer- we have load tested most major brand floor jacks and each front axle can handle a load that is higher than the floor jack is even capable of lifting.

As for the wheels, whether you are using a Jack Rod or not, you should always lift on flat ground, with your vehicle in park (or in gear) and the emergency brake set. And it never hurts to chock a tire.

Want more details, watch our product overview.

Watch Video

Customer Reviews

Based on 21 reviews
Christopher Nelson
Great product

Feels good having extra safety.


Well built fast shipping

Mike Jesse
Short jack rod.

My Jack Rod is too long when I lift my Covette with my jack. Maybe AGM could introduce a shorter version about 3 in. shorter. Just a thought.

Mike, thank you for the review. We are working on shorter version of the Jack Rod now for a commerical customer. The first version will have a single height setting at 6 inches (2 inches shorter than the collasped height of the standard length Jack Rod). But we count on feedback like yours to improve all our products, so input on what you feel is best is always appreciated. Should you want to share more thoughts, please feel free to email us- sales@agm-products.com.

Jack Rod just the answer!

I wanted a safe way to have a jack stand while rotating the tires on my very heavy Rivian R1T. I found jack rod on your site and it’s the perfect solution. Thanks, Bob

Great product

Awesome product!