Brake Reservoir Cap - Polaris RZR & General - AGMProducts
Brake Reservoir Cap - Polaris RZR & General - AGMProducts
AGM brake pressure bleeder-vehicle-brakes
AGM Quick Tips-why bleed your brakes

Brake Reservoir Cap - Polaris RZR & General

$59.99
SKU: AGM-BPB-CPOL
Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:$257.87
Description

For use with the AGM Brake Pressure Bleeder. Fits the following brake reservoirs with black caps:
- Polaris RZR, 2016-2021

- Polaris Ranger (excluding 2019+ models)

- Polaris General (all models)

Does not fit Turbo S or other models with the large yellow caps on the brake reservoir. 

To check if sizing is correct for your application, measure the inside diameter of your brake reservoir cap and compare to it to this product. This cap's inside diameter is 1.865in. 


NOTE: Polaris RZR PRO will require the 90* adapter to connect the AGM Brake Pressure Bleeder. 




Customer Reviews

Based on 57 reviews
81%
(46)
5%
(3)
9%
(5)
0%
(0)
5%
(3)
S
Scott Z.
Buy once cry once

That saying applies here for sure ,, I did new brake lines with my portals on a x3 and tried to vac bleed these
I had already known about the AGM and cap setup from the forums ,, well bleeding was going poorly so bought this kit and 3 days later I had it , 30 min later my brakes were all bled ,, flawless and if you buy a 45* 1/4 npt you can use the AGM fitting with a windshield in place

E
Erin T.
Outstanding Product - AGM Products Brake Pressure Bleeder

I felt strongly enough to write a review of the AGM products Brake Pressure Bleeder and Brake Reservoir Cap - Universal Adapter. I am very familiar with the traditional method of bleeding brakes through pumping of the brake pedal and opening the bleeder screw. This was always a 2-person job but no more. I used this kit of items on my 2009 C6 Corvette and it worked flawlessly. I did not fill the canister with brake fluid, rather I wanted to fill the brake fluid manually after performing two brakes lines at a time. The universal cap adapter securely fit on the brake fluid holding tank securely allowing the positive air pressure from escaping. Follow the directions and use no more than 12-15 psi in the tank and ensure no leaking through the rubber cap on the tank. Additionally, when using the cap adapter, ensure you route the chain around any brake lines or wires, this is an extremely important step. I hope this gives any car enthusiast the confidence to perform the brake bleeding method by themself in a safe and easy way. This is a wonderful product. And yes, I am an actual customer of this product and very happy with the decision to purchase!

J
John B.
Great product!

The brake bleeder worked awesome, would have a 5 star, but the pressure regulator was a little difficult to manage and keep even pressure. My son's Ford Fuzion would not bleed and I tried every trick in the book! 15 minutes later, rock hard pedal!

B
Burlison C.
Works great.

Exactly as advertised

B
Brad N.
Unable to use with no response from AGM

Received the brake bleeder and cap for toyotas. They don’t connect securely. I have emailed and called leaving a message with no response. It may be a great product, but I may never find out. I would not recommend based on the lack of response and service.

Brad, we failed you. In the flood of emails and calls last week, yours clearly did not get responded to. Apologies for the delay. We will reach out today to get more details on the items you ordered, the application you are using them on and how to solve your problem. We will make this right!