Weld-On Jack Point (with 10 degrees Misalignment) - AGMProducts
Weld-On Jack Point (with 10 degrees Misalignment) - AGMProducts
AGM Electric Jack introduction video
Weld on Jack Point welded onto a front control arm

Weld-On Jack Points

$72.00 $64.80 SAVE 10%
SKU: AGM-EJA-2031
Availability : In Stock Pre order Out of stock

Count: 4 pack

4 pack
1 pack

Frequently Bought Together

Total price:$1,299.98 $1,292.78
Description

Weld these bad boys to your suspension or chassis for a ultra secure way to lift your vehicle with our Jacks. Their diamond shapes allows for a little bit of play to make sliding the jack over the points easier. But prevents the vehicle from falling off the jack. Lock your AGM Jack to the vehicle when you lift with the Weld-On Jack Points.  

Weld-on Jack Point sold as single unit or 4 pack.

 

NOTE: Your vehicle weighs thousands of pounds. If it rolls that is a huge force put on a small area. Do yourself a favor and only lift on flat ground, with the vehicle in park/gear and tires chocked (rocks, large sticks, tools, tires, etc. make great chocks)

 

 

NOTE: Each Weld-on Jack points has extra material on the backside to allow you to sand away material to better contour the Weld-on Jack Point to the shape of the suspension or chassis component you are welding it to.  Do the following to know how much material is available.

1. Place the Weld-on Jack point into your Jack.

2. Mark (with a sharpie) the Weld-on Jack point material that protrudes out beyond the face of the Jack. This is the material you have to work with when shaping the backside of the Weld-on Jack point to fit your component. And don't forget to allow an additional .125-.250" of distance in this area for your weld bead. If you have questions, please call or email before installing.  

 

Customer Reviews

Based on 1 review
0%
(0)
0%
(0)
100%
(1)
0%
(0)
0%
(0)
D
David S.
Model Specific

I have no issues with the product. I understand it’s universal. I think it’d be good to offer model specific versions that mate better to the sxs control arms. The flat version leaves a major gap to fill in on the front control arms of my rzr turbo r in order to get it level and plumb.

David, thank you for the feedback and our apologies as it sounds like we did not make you aware that there is extra material on the backside of the Weld-on Jack points. That extra material is there so that you (or your fabricator) can better contour the back of the Weld-on Jack point to the shape of the suspension or chassis componets it is being welded to. We will update the verbage on the website to better reflect this. If you have any other questions we are happy to jump on a call or you can email us. 760-884-8319 or sales@agm-products.com.