AGM brake pressure bleeder-vehicle-brakes
AGM Quick Tips-why bleed your brakes

Brake Reservoir Cap - Can-Am / Ducati - Brembo Brakes -

$59.99
SKU: AGM-BPB-CCAN
Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:$238.41
Description

Fits many Brembo Brake reservoirs, including but not limited to the following vehicles.

Can-Am Maverick X3

Can-Am Maverick Sport

All Brembo equipped Ducati front master cylinders. Made for use with AGM Brake Bleeder. 

To check if sizing is correct for your application, measure from centerline to centerline on the bolts that hold your brake reservoir cap in place and compare to it to this product. This cap's bolt centerline is 1.590in.

 

NOTE: the color of this cap has been updated from Gold to Red

Customer Reviews

Based on 66 reviews
77%
(51)
5%
(3)
9%
(6)
5%
(3)
5%
(3)
E
Elyan c.
Cap seams to be warped

Used it 2 times it worked great but then the 3rd time of use the cap was warped and would not seat all the way down and would pop off when pressurized.

Elyan, thank you for letting us know. We just sent you an email to get the bleeder sent back to us, so we can better understand what is happening when you say 'the cap was warped'.

S
Scott Z.
Buy once cry once

That saying applies here for sure ,, I did new brake lines with my portals on a x3 and tried to vac bleed these
I had already known about the AGM and cap setup from the forums ,, well bleeding was going poorly so bought this kit and 3 days later I had it , 30 min later my brakes were all bled ,, flawless and if you buy a 45* 1/4 npt you can use the AGM fitting with a windshield in place

E
Erin T.
Outstanding Product - AGM Products Brake Pressure Bleeder

I felt strongly enough to write a review of the AGM products Brake Pressure Bleeder and Brake Reservoir Cap - Universal Adapter. I am very familiar with the traditional method of bleeding brakes through pumping of the brake pedal and opening the bleeder screw. This was always a 2-person job but no more. I used this kit of items on my 2009 C6 Corvette and it worked flawlessly. I did not fill the canister with brake fluid, rather I wanted to fill the brake fluid manually after performing two brakes lines at a time. The universal cap adapter securely fit on the brake fluid holding tank securely allowing the positive air pressure from escaping. Follow the directions and use no more than 12-15 psi in the tank and ensure no leaking through the rubber cap on the tank. Additionally, when using the cap adapter, ensure you route the chain around any brake lines or wires, this is an extremely important step. I hope this gives any car enthusiast the confidence to perform the brake bleeding method by themself in a safe and easy way. This is a wonderful product. And yes, I am an actual customer of this product and very happy with the decision to purchase!

C
Cal R.
Great Service and Product

Had a question so I called them directly. The rep was so professional, knowledgeable and polite I ended up buying while on the phone. The product when used performed exactly as described. In today's world of poor customer service due to not caring and horrible competency I will look to them anytime I need a product that they carry.

G
Gene
Works but bad impression.

It works, but it comes with a lot of black plastic debris in the chamber that you have to waste time, energy, and brake fluid to clean out. Otherwise you're pumping specs of black plastic into your ABS system and brake lines...

Gene, I apologize, that is a shitty first impressions and not at all what we aim for. We will review the cleaning process before packaging to figure out how this slipped by QC. If you are still seeing small pieces of plastic in your bottle, we are happy to exchange the product for a new one free of charge. Please email us at sales@agm-products.com if we need to exchange the product.
Thank you for making us aware of this and again we apologize for the oversight.