Universal bleeder attachment_AGM brake bleeder

Brake Pressure Bleeder

Name: Brake Pressure Bleeder
Brand: AGM-Products
SKU: AGM-BPB-1000
Price: 98.79 USD
Availability: InStock
Rating: 4.37 (89 reviews)

$98.79

SKU: AGM-BPB-1000

Availability : In Stock Pre order Out of stock

Frequently Bought Together

Total price:$168.77

This item: Brake Pressure Bleeder $98.79
Brake Reservoir Adapter - Universal Round $49.99
ATE Dot 4 SL $19.99

Description

Description

NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY.

"Works fantastic! Should've bought years ago. Makes doing brakes yourself that much easier".- Blake S.

When some jerk cuts you off in traffic, you need to know your brakes are going to work well for you and your family.

That's why regular maintenance like bleeding your brakes is so important. But the professional service can be costly and time-consuming. And a small part of you always wonders "did they do it right" and "Do I trust them with my families safety?"

If you're handy, detail-oriented, and can follow a YouTube video, then you do not have to find out if they did it wrong. You can use this tool to bleed your own brakes.

"I love the product, already serviced a second car at my home that had a bad rear wheel cylinder and bleed the brakes all around in minutes. So I did them twice just for good measure"... - Andres G.

The AGM Brake Pressure Bleeder's easy to use design takes the stress out of the job. You can now bleed your brakes by yourself in minutes, instead of wasting hours of your life in a fit of rage using the old manual method.

This positive pressure system gives you a professional quality brake bleed from the comfort of your garage. For less than the Dealership might charge for a single brake flush.

Check out this "How To" video to see just how easy it is to use the system.

NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY.

Key Benefits:

👤 One Person Job: No need to wait around until a friend is free. This easy-to-use system lets you take control. Bleed brakes by yourself in minutes, not hours, with no messy clean up.

💨 Constant Pressure: The AGM Brake Pressure Bleeder uses high power compressed air from your air compressor to force 100% of that dirty nasty fluid and air out of your brake system (no matter how complex it is). Giving you back that responsive brake pedal feel and making your car safe to drive again.

👍 Works with ABS & Traction Control: Dealerships use expensive positive pressure bleeders to flush brake systems on vehicle equipped with ABS and traction control. With the AGM Bleeder, now you can too....at home...at a fraction of the price.

BONUS: And if all these benefits weren't enough, we'll also throw in a FREE Catch Bottle, Syringe, and Filler Cap Wrench.

Get your AGM Brake Pressure Bleeder today and bleed brakes like a pro!.....your family will thank you.

Specs:

3 liter capacity
Built in adjustable pressure regulator
Built in pressure gauge
Built in ball valve to seal system from atmosphere
Works with air compressor
Works on vehicles with ABS or traction control

NOTE: MASTER CYLINDER RESERVOIR ADAPTERS SOLD SEPARATELY.

Adapters are not a one size fits all, there are so many different vehicle designs that we could not possibly guess which one would fit your vehicle. Which means that you would end up paying for parts you don't need and would never use. For this reason the adapters are sold separate. So you only purchase what you need.

HOW TO USE

STEP ONE

Fill with the correct brake fluid for your vehicle.

Step_2_Connect_air_to_AGM_Brake_Bleeder_combined - AGMProducts

STEP TWO

Connect to air compressor and your vehicle.

STEP THREE

Slowly open the ball valve to begin your brake bleed.

WHY SHOULD I CARE ABOUT BLEEDING BRAKES?

FLUIDS CRITICAL ROLE

If you are asking this question, that is a great start. Many people have not been told of the critical role that brake fluid plays in keeping you safe while driving. Watch this video before you drive again.

Wish I had one of these years ago!

Just used it the first time to replace all the fluid and damn this made the job easier! Replaced all the fluid and no air in the system, even got rid of the spongy GM brake peddle!
I used an inline pressure regulator for added safety and usability.
My only complaint is the 60mL syringe came cracked down the side but I had a smaller on on hand to draw out he excess fluid from the reservoir.

Todd, thanks so much for sharing your experience! Sounds like the setup worked great - glad to hear it made the job easier and got that GM pedal feeling right again. Smart move adding the inline regulator too! Sorry to hear about the cracked syringe, though. We'll get a replacement sent out to you. Really appreciate you taking the time to share your story.

NOT WORTH THE MONEY

quality control on manufacture isn’t great. After first use I thought I had defective cap but it turns out the bleeder itself. Was the issue where the cap screws on isn’t flush all the way so cap sits on the there crooked. After second use the cap blew off bleeder. I’ve been trying to get a replacement but I haven’t heard anything from anyone they did reply at first and then they stopped. Tried emailing and left a voicemail still no reply

CanAm cap and pressure bleeder.

This system made bleeding the brakes easier than I could have imagined. Works perfectly. I remember 40 years ago, helping Dad and learning how to bleed brakes. The days of being yelled at by Dad or, using your wife and risking your marriage are over.

Cap seams to be warped

Used it 2 times it worked great but then the 3rd time of use the cap was warped and would not seat all the way down and would pop off when pressurized.

Elyan, thank you for letting us know. We just sent you an email to get the bleeder sent back to us, so we can better understand what is happening when you say 'the cap was warped'.

Buy once cry once

That saying applies here for sure ,, I did new brake lines with my portals on a x3 and tried to vac bleed these
I had already known about the AGM and cap setup from the forums ,, well bleeding was going poorly so bought this kit and 3 days later I had it , 30 min later my brakes were all bled ,, flawless and if you buy a 45* 1/4 npt you can use the AGM fitting with a windshield in place

1 2 3

Agm manual jack

I recently purchased the manual jack for 400 bucks at the sand show and must say I’m so happy with this purchase. I used it to break my beads on my tires to install some 35’s on my can am x3 and used it to lift up my can am for the install.. the whole process was quick n easy and I should’ve purchased one a long time ago. I couldn’t be happier with my Agm jack and it looks cool mounted to my can am in the rear as seen in the pic.SHOUT OUT TO AGM!! Fantastic product!!👍👍

Manny, thank you for sharing and for stopping by at the Sand Show! Sounds like the jack got put straight to work...and using it to break beads too? Love the creativity! These kinds of stories are why we build this stuff in the first place. Appreciate you taking the time to share it, and glad you’re loving the setup!

No good

Jack mount bent when mounting it in place. If you don’t crank it down its loose and if you do crank it down base starts bending. Also the strap is already showing signs of fraying. The jack is amazing but I think these guys need to go back to the drawing board with this mount.

Shane, thank you for sharing your experience. This is super important for us to see as we did not experience what you are talking about during development. We will look at different materials as well as methods for improving grip to reduce torque required on the bolts. We'd like to work with you to solve this, please check your email for more details.

Perfect for what I needed!

Used the mount to mount the scissor jack to my trailers tongue. Will be purchasing a second mount to quickly move the jack to my UTV. I, like others, am also worried the blue strap is thin and not as heavy duty and may wear through in time but that is easily enough remedied.

Best jack ever

The price the quality 100%!! Recommend it.